Wheel & Caliper 50ml

CeramiTech Wheel & Caliper is designed to reduce contaminant build-up on alloy wheels. Once applied, cleaning becomes easier and wheels remain extremely glossy.

Other Benefits:

Less contaminant build-up.
UV&UVB resistant.
2 years+ protection term.
Hydrophobic.
Self-cleaning.
Anti corrosion/rust.
Chemical resistant.
Straight forward application.

Application Instructions

• For best results, Ceramitech Wheel & Caliper is to be applied indoors, in a dust-free environment.
• Thoroughly clean and dry all painted surfaces.
• De-contaminate all painted surfaces.
• If applicable machine polish enhances the surfaces then clean again using an IPA-type paint cleaner.
• Load the applicator with Ceramitech Wheel & Calliper and wipe onto the surface evenly.
• Work on small areas at a time.
• Remove residue immediately.
• Give a final inspection.
• Allow curing for a minimum of 4hrs.

Errors

• Any errors or mistakes must be rectified immediately.
• DO NOT apply more of the product to the affected area.
• Lightly machine until the error is rectified then re-apply.

Curing

• Ceramitech Wheel & Calliper can be cured at room temp.
• After 2hrs it will be tack-free and 48hrs will be fully functional.
• To speed up curing the use of infrared lamps will be beneficial at 60-80 degrees.
• DO NOT expose the coating to water or the elements for a minimum of 4hrs.

Extra Info

Consumption

• 50ml, approx 3-5 medium sizes cars alloys & calipers only.

Process temp

• 5-25°C. Avoiding direct sunlight and rain.

Additional Coats

• Increase thickness by re-coating no more than every 15mins.
• This will increase scratch resistance.